Gingo for Glass and Frames
Suitable for handling large plates or panels on building sites or inside workshops. It is a self-sufficient mobile manipulator that allows the high freedom of movement necessary to carry out installations easily and safely. Available with a load capacity of 350 or 250 kg in a version that can quickly be disassembled into pieces with a weight of less than 50 kg each for manual transportation to the storey where it needs to be used and can be reassembled.
Two people can install large glass walls or windows effortlessly by moving and positioning them directly with their hands. Gingo reacts sensitively to hand movements, so that the operators do not need to use any control buttons.
Two convertible pneumatic circuits that can also be connected to an external compressor.
Installation times are reduced by 60%, risks of injury and damage are significantly reduced. Suitable not only for installations on building sites, but also for loading and unloading lorries as well as for handling products in factories.
Pneumatic frontal rotation +10 – 20° for gripping objects from their stand and inserting them into their seat. Can also be used from the outside towards the inside with a negative rotation.
Manual lateral rotation + – 90° for aligning the glass in the direction of movement, so that it can pass through doors while the glass is being held.
Manual frontal rotation + – 90° for rotating the longer side of the glass into a vertical position